Search
Close this search box.

Midline Wafer-Type Soft Seal Butterfly Valve

  • Design and manufacturing standard: GB/T 12238-2008
  • Structural length standard: GB/T 12221-2005
  • Connection standard: GB/T 9113
  • Pressure and temperature rating: GB/T 12224-2005
  • Test and inspection standard: GB/T 13927-2008

Contact us

Product Description:

Structural Characteristics Of The Middle-line Clip-on Soft Seal Butterfly Valve

  1. Novel design, reasonable structure, unique structure, light weight, fast opening and closing;
  2. Small operating torque, easy to operate, labor-saving and dexterous;
  3. It can be installed and maintained in any position, and is convenient for maintenance;
  4. The sealing elements can be replaced, and the sealing performance is reliable, achieving bidirectional sealing with zero leakage;
  5. The sealing material is resistant to aging , corrosion, and has a long service life.

Technical Parameter

  • Rating Pressure: indicates the maximum pressure that a valve can withstand under rated operating conditions, typically expressed in megapascal (MPa) or pound-force per square inch (psi).
  • Nominal Diameter: Refers to the design size of a valve, commonly measured in millimeters (mm) or inches (inch).
  • Body Material: Describes the material of the main body of the valve, usually stainless steel, carbon steel, cast steel, etc.
  • Interface standard End Connection: It indicates the connection method between the valve and the pipeline, including wafer-type Wafer, butt-welding Welding, and thread-type Thread.
  • Operating Temperature: It indicates the maximum temperature range at which the valve can operate normally, usually expressed in degrees Celsius or Fahrenheit.
  • Fluid Medium: It refers to the fluid medium applicable to the valve, which can be liquid, gas, steam, etc.
  • Leakage Class: It indicates the allowable leakage of the valve when it is closed. Common leakage classes include zero leakage and sealed leakage.
  • Actuation refers to the method of operating a valve, which can be manual, electric, pneumatic, etc.
  • Flow Coefficient: It represents the ability of a valve to pass fluid, and is commonly measured in liters per minute (l/min) or gallons per minute (gpm).
  • Accessory Options: Some additional options, such as handles, limiters, electric actuators, etc.

Standard Specification for Midline Wafer Type Soft Seal Butterfly Valve

  • Design and manufacturing standard: GB/T 12238-2008
  • Structural length standard: GB/T 12221-2005
  • Connection standard: GB/T 9113
  • Pressure and temperature rating: GB/T 12224-2005
  • Test and inspection standard: GB/T 13927-2008

Application Scope Of The Midline Wafer-type Soft Seal Butterfly Valve

Widely used in water supply and drainage systems in water plants, power plants, steel plants, paper making, chemical industry, catering and other industries

The Lowest-Cost Strategy Is To Choose Reliable TIANYU Valves.

TIANYU Valve, with its experienced specialists, specializes in manufacturing industrial valves and provides technical support and one-stop solutions for the global market.

Contact Us

You can contact us for any information related to our valves and company. We recommend that you provide us with as much detail as possible about your requirements, so we can serve you faster and better.